Keith is ready for Halloween and Christmas! Check out the light display props that he put together.

"Here’s some of what I’ve been working on with the maker pipe connectors this year. This is the rooftop of a friend's business who wanted to make Halloween even brighter. I used your connectors to create multiple U shaped cradles in multiple spots that hold to the front roof ‘front wall’ and from there hold up the cemetery fencing, tombstones, cross, and ghost. I made the cradles to hold sandbags to hold down the cradles (the long run is actually 2 cradles that attach together in place, but separate to make transportation and storage easier).

For a little extra safety, I used an old mega tree platform (ugly plastic pallet with wood framing) to brace the topmost display cradle that I had feared could be moved in a high wind situation. Though no sign of that yet, just being cautious. It is also set up with the Christmas icicles already installed, after Halloween, I can remove the Halloween props and replace them with the mini trees and arches for Christmas. There are also 3 vertical strips of lights on the front of the building, at the concrete sidewalk I drilled out and installed 3/8” anchors, and using a piece of all thread connected to the threaded pipe inserts, followed by 1 conduit coupling to join 2 sections of EMT, at the top is a telescoping clamp that allows height adjustment before going over the wall and back down the other side with sandbags to secure it all in place."

https://youtu.be/v8oWAxK8FnQ?si=OysLViUEDNCUjUW0