"I used ¾” EMT conduit for the main frame. I used ½” EMT conduit at the corners that slips inside the ¾” pipe. They are held in place by button spring clips inserted into the ½” pipe and pop up through the ¾” pipe as can be seen in this picture. The uprights are placed into fishing rod holders.

I had some wooden dowels made with a center hole drilled 6 inches deep leaving the bottom 2” of each dowel solid. Finally, I bought some ghillie netting from Macks Prairie Wings. When sitting on chairs inside the blind, the top of the blind is at eye level. It is made to easily assemble and disassemble in the field. Takes about 5 minutes either way. Hope to finally get out by Friday to see if it will work." - Bob