Meg and Jon from Walnuts and Wineberries recently finished this awesome solar panel setup. It is a pole house system for 8 total solar panels and is made entirely out of 1" EMT Conduit and Maker Pipe Fittings. It's totally off the grid and is offsite from the large office/workshed that it powers. It was originally made to be adjustable, but Jon isn't sure if that's going to be needed.

Jon incorporated some cool design techniques including concrete footers that the Maker Pipe Standard Flanges and Adjustable Angle Flanges are mounted to. He used these Red Head Trubolt Anchors that drill and expand into the concrete paver.

Something else cool was that he used Maker Pipe Cross Over Clamps to mount PVC Conduit to the underside of the array which helped a ton with cable management and wire protection.

All in all this setup is very functional and cool!