Awesome build from Kimberly!

"With maker pipe you can build things to solve particular problems or to perform particular functions. You can keep on building until you are satisfied. When you are finished, you can make adjustments and add or remove parts to make something completely different. Working with wood is really different. It is a big deal to make a minor adjustments with it.

This project is a cart for an air fryer toaster oven. In the instructions they say not to put it directly under a cabinet because they get really hot. I reused a table top from Ikea. I used the measurements on the description of the item to figure out the size of the top. I didn't calculate correctly to use the connectors I selected to mount the top. I was able to take these parts off and used 90 degree connectors and EMT 3/4 inch hangers to mount the top. I need space to put pans on the way in and out of the oven. I'm going to add a little drawer with a piece of plywood on its top that will pull out for a place to work on. I will mount drawer slides on 2x4s and hang them with 3/4 inch hangers to the cart. The T's in the third picture are there temporarily while I mount the drawer."